

Queen Bees, Bee Packages, Beekeeping Equipment
How Do I…? Practical Beekeeping Videos
Start at the beginning or jump to the question you need answered.
Sometimes it’s easier to understand a task when you can watch someone do it. These videos from 5280 Apiaries walk through everyday beekeeping questions—from installing your first nuc to removing frames and checking colony growth.

How Do I Install a 5-Frame Nuc?
Getting Your Bees Settled
Your bees have arrived—now what?
Follow along as we transfer a five-frame nucleus colony into its new hive, keeping the frames in their original order and orientation. Have your hive, protective gear, and feeding equipment ready before you begin.
You don’t always need to transfer them immediately. Allowing the colony to settle for a day or two can be helpful, provided the nuc box is suitable, weather conditions allow, and the bees have adequate food, ventilation, and room.
Place the nuc securely on top of the prepared hive, or immediately beside it, with its entrance facing the same direction as the permanent hive entrance. Open the entrance once the nuc is safely positioned at its final location. Never leave bees sealed in a transport box while waiting to install them.
Once the bees begin flying, they orient to that spot. Choose the location before opening the entrance, and keep the permanent hive there after transferring the frames. Moving an established colony later requires additional planning.
How do I Feed My Colony?
Why Feed Bees in the First Place?
Flowers in the neighborhood don’t always mean enough nectar is coming into your hive. Feeding can help a new colony draw comb, support growth during a nectar shortage, and build food reserves. Learn what to look for before deciding whether your bees need supplemental feed.
If you have a young Hive such as a nuc, a swarm, or a bee package, they need to be fed. The reason is they have to work to get to expansion, which is sometimes more than the workforce or the nectar, or pollen in the area can support even if a mature hive would be fine. Not feeding is how to possibly stunt young hives
How Do I Use a Wide-Mouth Quart Jar Feeder?
A wide-mouth quart jar can be a simple, affordable feeding option for a young colony. Its smaller capacity makes it easy to handle and monitor, although a growing colony may empty it quickly. Just poke three small holes in the lid and let vacuum do the work.
We use 1 gallon in hive feeders on our main hives, and quart mason jars on our nucs. But in a pinch a mason jar or 4 can move the needle.
How Do I Reduce Drowning in a Feeder?
Bees need secure footing while accessing syrup. No feeder is completely risk-free, but the right setup can greatly reduce drowning.
Our preferred option is an inverted mason jar feeder above the inner cover, enclosed by an empty deep box and the hive’s outer lid. Bees drink through small holes in the feeder lid without entering an open reservoir of syrup.
Position a jar over the inner cover’s feeding hole. To use additional jars, support them securely on small shims so bees can reach the perforated lids from underneath. Keep the inner cover’s access hole open so bees can enter the enclosed feeding space, but prevent outside bees from accessing it.
Check that lids seal properly, jars remain stable, and syrup does not continuously drip or pool. Clean up spills promptly and check regularly for mold, leaks, and empty jars.
Another option is a poultry-style waterer with a shallow trough filled with clean pebbles or sand, providing footing above the liquid. Keep landing surfaces exposed as the trough refills, and clean the feeder regularly. If using syrup, keep it enclosed within the hive’s feeding space rather than accessible to neighboring colonies to reduce the risk of raiding.
How Do I Encourage Bees to Build Out More Frames?
Your colony may be growing while the outer frames remain untouched. Carefully repositioning a frame can make unused space more accessible and encourage bees to draw additional comb.
You may hear this called “checkerboarding,” this is for helping a young colony gradually expand within its box.
Start small. When the colony is strong enough and actively building comb, position one frame of foundation immediately beside the outer edge of the brood nest. Keep the existing brood frames together rather than separating them with undrawn foundation.
Let the bees set the pace. Recheck progress at your next inspection, often in 7–14 days during active growth. If they are drawing and occupying the frame, another adjustment may be useful. If it remains untouched, don’t keep adding more space around the brood.
Warm weather, enough young bees, and incoming nectar or appropriate supplemental feeding all influence comb building. A weak colony, cold nights, or a nectar shortage calls for a more conservative approach.
Bees already know how to build comb. Our job is to provide usable space at the right time without disrupting the nest they’re working to maintain.
How do I know when to Feed Pollen Patties?
Pollen provides nutrients that support brood rearing. Pollen is the protein and syrup/nectar is the carbohydrates. A pollen supplement or substitute can help when natural pollen and stored bee bread are limited. But not every colony needs it all the time.
At 5280 Apiaries, I start small and watch the response. Offer a portion about the size of a golf ball, flattened into a thin patty—or smaller for a small colony. Place it where bees can readily access it, following the product’s instructions.
Check within a few days. If the bees consume it, replenish with another slightly larger portion. If they leave it untouched, remove it and reassess. When the colony otherwise has adequate resources, I may wait a week or two before offering it again.
Consumption is a useful clue, not the whole diagnosis. Consider incoming pollen, stored bee bread, brood levels, colony strength, and the season. Protein feeding can encourage brood rearing, which also increases the colony’s need for honey or syrup.
Remove patties that are dried out, moldy, or infested. Offer only what the colony can use promptly rather than leaving a large amount sitting in the hive.
Small hive beetle pressure is generally lower to non-existent in Colorado than in warmer, humid regions, but don’t assume your yard is beetle-free. Check beneath uneaten patties for beetles and larvae.
Keep pollen patties in the freezer to keep from spoiling when not being used. Pollen Pattie recipe Here
Working Comfortably Around Bees
How Do I Drink Water While Wearing a Bee Suit?
Getting absorbed in an inspection is easy; forgetting to drink is even easier. Plan water breaks before you get hot or thirsty. This video covers how I manage hydration around the bee yard, including stepping away from active colonies before opening protective gear and checking for bees before closing it again.
It sounds like a funny thing to include. But I have been asked before.

Looking Inside the Hive
How Do I Remove a Frame?
Frames can be firmly attached with propolis and wax, and pulling against that resistance can damage comb or crush bees. Watch how to loosen a frame, create working space, and lift it with controlled movements while keeping it over the hive.
How Do I Avoid Rolling Bees or Injuring My Queen?
“Rolling” happens when bees become trapped and dragged between comb surfaces as a frame is removed or replaced. It can injure or kill workers—and the queen if she is caught between the frames.
Create working space before lifting. Loosen the frames with your hive tool and carefully remove an outside frame first, checking for the queen. Keep that frame secure beside the hive. Use the space you’ve created to separate neighboring frames before lifting them.
Move slowly, lift straight up, and avoid scraping one comb against another. When returning a frame, give it clearance on both sides and lower it gently before easing the frames back together.
Watch the frame edges and rests as well: bees can be crushed where wood meets wood. If something catches, stop and check rather than forcing it.
Do I Need to Find My Queen During Every Inspection?
Finding the queen can be exciting, but it isn’t the goal of every inspection. A queen can fail and look healthy when fresh eggs, young larvae, and the brood pattern can provide useful evidence of recent useful queen activity. Learn when those signs are enough—and when locating the queen is necessary for the task you’re doing.
How do I spot drone brood, honey brood, pollen and wonky comb(burr comb)?
<-----Check this out
How Do I Remove Burr Comb
Bees sometimes build extra comb between frames, across top bars, or between boxes. This burr comb can connect parts that need to move separately, making inspections harder and increasing the risk of rolling or crushing bees.
Clear those connections before forcing frames apart. Check for the queen and other bees, then use your hive tool to carefully remove comb that obstructs movement. Work slowly, extra comb may contain brood, pollen, or honey, so inspect it before scraping.
The goal isn’t to remove every trace of wax. It’s to keep frames accessible and maintain enough clearance to inspect without tearing neighboring comb or damaging bees and their resources.
Collect scrapings in a covered container rather than dropping them around the hive, especially pieces containing honey that could attract robbers. Return frames to their proper spacing to help limit future comb bridges.
A tidy, properly spaced hive is easier to inspect gently. Less wrestling with frames means fewer opportunities to injure bees.
How Do I Know When to Add Another Deep?
Adding a box is about colony readiness, not simply how long you’ve owned the bees. Look at how much comb is drawn, how thoroughly bees occupy the existing frames, and whether the colony can use and defend additional space. This video shows the signs I consider before adding another deep. 7/10 rule, at least 7 frames out of 10 built out if in a nectar flow.
Do not throw a second deep on there just in case, it slows your colonies growth and or stalls them. Bees like small tight spaces, they have to heat that to 96 degrees for the brood nest. only add when the bees are ready.